Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Parts & Welding in Los Gatos: What to Know First
We provide independent Linear gate parts and welding service in Los Gatos, with most hinge, post, and rail repairs completed in a single visit and priced in writing before we start. A typical Linear swing-gate hinge replacement runs $280-$420; custom welding for a sagging estate-gate frame usually falls between $340-$580 depending on material thickness and access. This page is for homeowners in Los Gatos who already know they own a Linear operator and need the mechanical hardware repaired or fabricated, not replaced with a different brand. If your gate is dragging, binding, or throwing the operator into safety shutdown, the problem is usually in the physical gate, not the motor. Call (831) 246-7187 for a free, written estimate.
How Linear Products Fail - and How We Fix Them
- LA500 / LA500UL swing-gate arms: The cast-aluminum clevis pin housing cracks where it meets the gate bracket, especially on uphill grades common off Los Gatos Boulevard near Vasona Lake. The operator keeps running but the arm slips, so the gate stalls mid-travel and the motor overheats. We weld a steel reinforcement gusset onto the bracket or replace the housing with an OEM-spec casting, then re-clock the limit switches and photograph the new travel arc.
- Linear Pro Access slide-gate rollers: The V-groove steel rollers on Pro Access systems seize when packed with oak pollen and fine silt from Los Gatos canyon roads. The gate motor amps spike, the control board throws an overload fault, and owners assume the operator failed. We pull the rollers, check the axle bore for ovaling, and press in sealed-bearing replacements with zinc-plated axles that shed debris better than the factory open-race design.
- Linear HSLG (High-Speed Linear Gate) hinge fatigue: The 3-inch barrel hinges spec’d for HSLG commercial-duty swing gates develop vertical play after five to seven years of opening against the morning fog swell in wood gates. The gate drops 1/8 inch, the latch misses the strike, and the safety loop reads “obstruction.” We bore out the hinge barrel, weld in a hardened bushing sleeve, and re-pin to factory elevation.
- Linear DC-powered estate-gate rail separation: On custom iron gates with Linear RSG slide operators, the bottom rail welds crack where the catch carriage impacts the stop block. The rail spreads, the carriage jumps track, and the gate derails completely. We cut the failed rail section, fish-plate with 3/16-inch steel matching the original profile, and weld in a new urethane stop bumper so the impact load distributes rather than concentrates.
- Linear actuator mounting-post rot: The steel post that carries a Linear LA212 or LA412 residential operator rusts through at the concrete grade line, particularly on properties with sprinkler overspray against the fence line. The post leans, the actuator binds, and the gate stalls. We extract the post, weld a new schedule-40 steel stub with a hot-dipped galvanized base plate, and set it in a sonotube with sloped concrete troweled above grade to shed water.
Our Linear Gate Parts & Welding Process
- 1
Call and describe the symptom. A live person answers 24/7. We ask which Linear series you have, what the gate is doing, and whether the operator display shows a fault code. We schedule a free estimate or, for inoperable gates, dispatch same-day.
- 2
On-site diagnosis with documentation. The technician arrives in uniform, name and photo already sent to your phone. We measure gate travel, check voltage at the operator terminals, and inspect every weld, hinge, and roller. We photograph what we find and show you on a tablet before quoting.
- 3
Written price under Haven Standard Clause 1. You get an itemized, flat price for parts and labor before any tool leaves the truck. No “call for a quote,” no range that widens later. If you have a written estimate from another company, we review it free under our second-opinion policy.
- 4
OEM or quality aftermarket parts selection. For Linear hardware, we stock common hinge castings, roller assemblies, and limit-switch kits. If your part is obsolete, we source certified aftermarket equivalents with compatible duty ratings, never substituting a lighter grade. You see the part number and origin before installation.
- 5
Repair, weld, and test to spec. We weld with ER70S-6 wire on steel gates, 5356 alloy on aluminum, always grinding back to profile so the gate doesn’t bind in travel. After repair, we cycle the gate twenty times under load, record the operator amp draw, and set the limit switches to Linear’s specified travel angles.
- 6
Photo record and 365-Day Done Right Promise. Before we leave, you receive a photo log of every adjustment and a written record of the part number installed. Under Clause 4 (Evidence on every job), this documentation is filed in your job record at no additional charge. If anything fails within one year, we make it right at no additional charge.
BeforeAfterWhat Linear Gate Parts & Welding Costs in Los Gatos
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Linear hinge replacement (single) | $280-$420 | Gate weight, aluminum vs. steel, concrete removal for in-ground posts |
| Linear roller replacement (set of 4) | $320-$480 | Bearing type (sealed vs. open), axle diameter, track condition |
| Custom rail weld/reinforcement | $340-$580 | Material thickness, access for welding, need for temporary gate support |
| Post replacement with operator remount | $480-$760 | Post depth, concrete volume, whether operator arm needs re-timing |
| Latch/strike realignment or replacement | $180-$290 | Magnetic lock vs. mechanical, need for new jamb plate |
These are real Los Gatos prices for real Linear hardware, not teaser rates. Every estimate is free, every price is written and agreed before work starts, and every invoice matches the quote. Call (831) 246-7187 for your exact number.
Why Los Gatos Homeowners Call Vance Gate Repair Los Gatos for Linear Work
We’ve repaired and installed over 22,000 gates since 2014, every one with a written price first and a documented record at the end. Adrian Vance started this company after years in commercial access-control installation, and the habit stuck: name what you found, name what it costs, name what you left behind. In Los Gatos, that means understanding how hillside grades and morning fog wear on hardware that owners don’t notice until the gate stops mid-swing. We’re also not a single-brand shop. We service nine automation brands - Linear, LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and four others - so when your Linear operator needs attention too, one crew handles the mechanical and electrical together. Live person answers the phone 24/7. Background-checked, uniformed technicians. Written price before work. Photo record after. One full year to make it right. That’s The Haven Standard.
FAQs
No. Linear’s operator warranty covers the motor and control board, not the gate structure itself. As an independent Linear service provider, we weld and repair gate frames without affecting operator coverage, provided we don’t modify the operator’s electrical harness or mounting points. If your operator is still under Linear’s factory warranty, we document our work separately so there’s no confusion at claim time. Call (831) 246-7187 if you’d like us to review your warranty status before scheduling.
We stock common Linear hinge castings, roller assemblies, and limit hardware at our local facility, so most Linear gate parts repairs in Los Gatos are same-day. Obsolete Pro Access or HSLG components typically arrive within two business days from our certified aftermarket suppliers. We never leave a gate inoperable waiting on parts; if a hinge or roller is backordered, we fabricate a temporary safe solution and return for permanent installation at no additional trip charge.
Repair, if the gate structure is sound. Linear operators are built for long service life, and most “system failures” are actually mechanical binding from worn hinges, seized rollers, or separated rails. We replace the gate hardware, verify the operator is running within spec, and you keep the system you already know. We only recommend full replacement when the gate frame is structurally compromised beyond economical welding or when you specifically want to upgrade. Our free estimate includes an honest assessment of both paths.
Yes. A welded rail or replaced hinge changes gate weight, travel geometry, and limit-switch timing. Our technicians adjust the Linear operator’s force settings, re-clock the limit switches, and record the new amp draw before leaving. You don’t need a second contractor for the electrical side. The written price covers both mechanical and operator calibration; we don’t split the job to add fees.
Our 365-Day Done Right Promise covers all completed work with no expiration within that window and no argument if something fails. If a weld cracks, a hinge loosens, or a roller seizes within one year, we return and make it right at no additional charge. That’s Haven Standard Clause 3, and it’s in writing on every invoice. Call (831) 246-7187 - a live person answers, and we’ll have a technician back to your Los Gatos property promptly.
Written by Adrian Vance, Owner, Vance Gate Repair Los Gatos at Vance Gate Repair Los Gatos, serving Los Gatos and nearby areas.